Solar White Jade Road Stud (Battery)

Key features:
Thin: 20MM
Can be fixed on top of round speed hump or water barrier by bitumen glue layer.

Technical features:
Item Description
Model RSPS-1-WJ-F (ONE WAY FLASHING)
Size: 100*100*20mm
Weight: 0.26kgs
Packing: In carton. 48PCS/carton, Carton size: 38*28*28cm
Solar cell Type Mono crystalline
Battery Type Heat-resistance Ni-MH
Circle life 1000 circle(over 3 year)
Work temperature -20 º C~+70 º C
LED frequency 1Hz
Size ¦µ8mm
Number 6PCS
Color White, yellow, red, blue, green
Flash way Blink
Luminous intensity Over 5000 mcd
Output on full charge 120 hours' blinking
Time to full charge Time to full charge 8 hr in 100Klux(sunny day)
Compression resistance 10 tons
Starting intensity 300 LUX
Application situation Edge line
Life in use 3 year
Warrant 1year
Material of body shell: PC
Water proof IP68
View distance: Over 1000m
Installation Procedure:
1. Check if the solar stud charge and discharge in normal way;
2. Identify the place and distance for installation and clean road surface;
3. Clean the bottom of the solar stud and glue the bottom, make sure the whole bottom is covered by glue
4. Stick road stud onto the road surface. (You can also lay on road surface some glue)
5. Steady it with two screws if road condition is bad such as sandy road.
6. Don't put them into use till 4 hours later when they are completely dry.
7. Can be also installed onto column post.