ALUMINUM-EXPOXY ROAD STUD

Features: Anti-pressure shell and anti-abrasion lens
Item No.:
RSA-5-D: One way, compression resistance 20 mts. Micro prismatic acrylic reflector.
RSA-6-D: Two way, compression resistance 20 mts. Micro prismatic acrylic reflector.
RSA-5-M: One way, compression resistance 15 mts. Micro prismatic acrylic reflector.
RSA-6-M: Two way, compression resistance 15 mts. Micro prismatic acrylic reflector.
RSA-7-D: One way, compression resistance 20 mts. Glass-faced Micro prismatic acrylic reflector.
RSA-8-D: Twoway, compression resistance 20 mts. Glass-faced Micro prismatic acrylic reflector.
RSA-7-M: One way, compression resistance 15 mts. Glass-faced Micro prismatic acrylic reflector.
RSA-8-M: Two way, compression resistance 15 mts. Glass-faced Micro prismatic acrylic reflector.

Body Materials: Die-cast aluminum alloy shell filled with epoxy glue
Size: 100*100*20mm
Reflective panels: (21± 0.5cm2 ) Acrylic micro-prismatic reflector
Angle of Reflective Face: 30 degrees
Colors: White, yellow, red, green, blue
Shank length: 50mm
Shank diameter: 1) 16~19mm
Weight: 286-305g (10*10cm)
Compression resistance: 10-16 tons
Resistance: Against kerosene and oil
Life: 3-5 years
Warrant: 1 year
Type of bonding: Recommend by means of two-component adhesive
Advantage:
1)Under each reflector there is a vacuum plate which prevent the reflector from being polluted by air or water. And make it can even work after some part of reflector is broken.
2)whole road stud including reflector is totally solid, no any emptiness, that is why our road stud is so highly compression resistance, both body and reflector not easy to be broken
3)Glass face, as its name, is made of glass and used to protect reflector from being scratched by small stones or sands on wheels
4). No fading in 3 years with high quality pigment of lens and special UV-coated treatment.
5). Complying with EN1463-1 and ASTM 4280.

Entrance angle V= 0°
H= ± 15° V= 0°
H= ± 15° V= 0°
H= ± 15° V= 0°
H= ± 15°
Observation
Angle 2° 1° 0.5° 0.3°
White Ri
(mcd /1 x-1) 7.5 64 292 414
Yellow Ri
(mcd / 1 x-1) 4.7 30 195 276
Red Ri
(mcd /1 x-1) 4.1 18.6 100 221

Installation:
1. Identify the place and distance for installation and clean up;
2. Dig holes according to anchor length and diameter (if have anchor), fill in and around the holes with proper epoxy glue or asphalt.
3. Clean bottom of road stud and glue it onto the installation place;
4. Clean the spillage. Wait till 4 hours later before road stud is workable.