LANE DIVIDER

Special Road Stud to be used in central line effectively dividing driving area

Feature: TPU flag, Never broken
Item No.: RSPD-1: One way
RSPD-2: Two way
Body Materials: High flexible TPU
Size: Upper Flag: 245(H)*115(W)*12mm
Base: 250(H)*158(W)*25mm
Reflective panels: (21± 0.5cm2 ) Acrylic micro-prismatic reflector
Reflective sheeting: Reflexite high intensity
Angle of Reflector: 30 degrees
Flag colors: Yellow, red
Weight: 1.4kgs
Compression resistance: 30 tons for the base
Life in use: 100 thousand times
Type of bonding: Recommend by means of two-component adhesive
Life: 3 -5years
Warrant: 1year
Characteristics:
1. Bayer TPU material, spring back more than 100, 000 times
2. Flag with reflective sheet work normally at night and in rainy, snowy & foggy weather.
3. No fades in five years.
5. Base is made of reinforced plastic with compression resistance over 30T.
7. Flag replaceable means longer life and less cost.
8. Glass-faced micro prismatic reflector on the base is abrasion-resistant, free of pollution and performing well on reflection

Installation:
1. Identify the place for installation and clean up;
2. Clean bottom of the lane divider and glue it onto the installation place;
3. Clean the spillage and wait until 8 hours later before it works.